 |
FLO Headworks: |
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| For its time, the Panhead was a
high-performance engine. Its overhead valves, hydraulic lifters and
aluminum heads were based on WWII aircraft technology, and improved both
performance and reliability.
But the Panhead's engineers never envisioned today's unleaded gas or high cruising speeds. To make your Panhead run with today's Twin Cams, you should start with our No Lead conversion service. Our replacement valve springs will reduce friction; Dual Plugging will eliminate detonation you may not even be aware of; our Hydraulic Lifter kit will improve volumetric efficiency; and our Super Port Flow process will dramatically increase power. |
 |
| Like Shovelheads, Panheads have
exhaust problems. Spigots wear our prematurely and the clamps won't
tighten up. Our 3-Bolt Exhaust Flange kit is a permanent cure for these
problems
Panheads suffered from a design deficiency that resulted in poor top-end oiling. Our Top End Oiler kit will save your rockers, valves, and guides from premature wear and costly replacement. |
|
| SCROLL DOWN FOR DETAILED PRICE LIST | |
|
|
|
| Click any item for a detailed description. Scroll down for prices. | |
| PARTS | SERVICES |
| Cylinder Heads | No Lead Conversion |
| Power Arc Ignition Kit | Super Port Flow |
| Dual Plug Ignition Kit | Dual Plugging |
| Dual Plug Wire Kit | General Port Work |
| 3 Bolt Exhaust Flange Kit | 3 Bolt Exhaust Flange Install |
| Top End Oiler Kit | Machinc for Top End Oiler Kit |
| Top End Return Kit | Machinc for Oil Return Kit |
| FlowMaster Cams (Indexable) | Cylinder Head Machining |
| FLO Valve Spring Kit | Repair Work / Welding |
| FLO High Flow Valves | Cylinder Head Painting |
| FLO Pushrods | Cylinder Head Resurfacing |
| FlowMaster Cam Kit | Dynamometer Test & Tune |
| Hydraulic Lifter Kit w/Pushrods | Flow Testing |
| High Flow Valves | Kehien Carb Blueprinting |
| Kehien
CV Carburetor 40mm (like new) |
Lower End Rebuild |
| Kehein Intake Manifold | Lower End Machining |
| 700 CFM Air Filter Kit | |
| Thunderjet
Kit Installed (racing only) |
Transmission Overhaul |
| For credit card orders, add a 5% handling charge. | |
|
© 2000-2014, FLO
Headworks. Contact Perry Kime at 805-481-6300 or via
e-mail. |
